
c.
+--.
GTE
-
Florida
Unbundled Network Element (UNE) Non-Recurring Cost Study
facility components such
as
pair gain applications and loop
concentrators/multiplexers.
The 4-
wire Analog Loop is
an
Exchange
-
Basic
UNE.
Note: GTE does not guarantee data modem speeds
on
either 2-wire or 4-wire Analog Loops.
2-wire Digital Loop
is a 2-wire transmission facility capable of transmitting digital signals
up
to
160 Kbps with
no
greater line loss than 38 dB end-to-end measured at 40
Hz
without loop
repeaters. Dependent upon
loop
make-up and length, midspan repeaters may be required; in
which case line loss levels will be
no
greater than 76 dB at 40
kHz.
In
addition, a 2-wire
Unbundled Digital Loop, dependent upon loop make-up, may be configured to support Enhanced
Copper Technologies (ECTs) such as ADSL. When configured in this fashion, these loops must
be provisioned over copper facilities that contain
no
load coils and minimum allowable bridged
tap. The 2-wire Digital Loop is an AdvancedSpecial
-
Basic
UNE.
4-wire Digital Loop
is a 4-wire copper facility suitable for the transport of digital signaling. This
loop type will contain
no
load coils and minimum allowable bridged tap. A 4-wire Digital Loop
may be used by a CLEC to provision services such
as
ISDN-
PRI
or HDSL. The 4-wire digital
UNE
is
not available where GTE has provisioned its local network utilizing Digital Line
Concentrators (DLCs). GTE does not supply the electronics associated with these service types.
The 4-wire Digital Loop
is
an AdvancdSpecial
-
Basic
UNE.
DSI
Loop
is a transmission facility that provides connectivity from the serving central ofice
termination point to the network interface device located at the end user’s premises. A DS 1
Loop will support a digital transmission rate of 1.544
IviBPS
and contains
no
load coils and
minimum allowable bridged tap. A DS1 Unbundled Loop includes the necessary electronics to
provide the DS1 transmission rate. DS1 Unbundled Loops will be provided only when the
electronics necessary to provide the DS1 functionality are currently available for the specific
loop being requested. The DSl Loop
is
an AdvancedSpecial
-
Complex
UNE.
DS3
Loop
is a transmission facility that provides connectivity from the serving central office
DS3 termination point (typically a DS3 patch panel) to the network interface device located at
the end user’s premises. A DS3 will provide for 45
IviBPS
digital transmission channels. A DS3
Unbundled Loop offers a CLEC the ability to provision the equivalent of 28 DSls or 672 DSOs
(basic 64
KBPS
digital channels). A DS3 Unbundled Loop includes the necessary electronics to
provide the DS3 transmission rate. DS3 Unbundled Loops will be provided only when the
electronics necessary to provide the DS3 functionality are currently available for the specific
loop being requested. The DS3 Loop
is
an AdvancedSpecial
-
Complex
UNE.
Subloop
Unbundling
Unbundled
Subloop
Distribution
is a transmission path that extends from the Feeder Distribution
Interface (FDI), or its functional equivalent, at a GTE cross-connect box, to an end user customer
premises. The
NID
at the end user premises is included with this subloop element. Subloop
Distribution is an Exchange
-
Basic
UNE.
Unbundled Subloop distribution can be configured
as:
13-FL
8
ma-le
-
JUM
ZWO
Page
8
of
13
Commentaires sur ces manuels